KERN & SOHN VFB 2T-3 - Manual (Page 24)

VFB-BA-e-1310 24
Note:
When the balance is unloaded the saved taring value is displayed with
negative sign.
To delete the stored tare, unload the weighing plate and press the
button, the zero display appears.
The taring process can be repeated any number of times. The limit is
reached when the whole weighing range is exhausted.
8.2 Numerical tare input (PRETARE)
The system has the possibility to enter the tare weight.
A tare weight which is bigger than the maximum of the weighing system, will not be
accepted.
8.2.1 Enter tare weight
Enter the pretare value or invoke the stored pretare value:
 In weighing mode press the button for approx.3 sec., the tare value saved
as last will be displayed, the left digit flashes.
 Press the navigation buttons (see chap. 5.10.1) to enter the desired value, the
active digit is flashing.
 Acknowledge with
. The entered value is displayed as negative pretare
value.
 Lift- off load, the net weight is displayed, moreover „NET“ will appear
8.2.2 Delete pretare value
When entering the pretare value, set all decimal digits to „0“.