KERN & SOHN VFB 2T-3 - Manual (Page 28)

VFB-BA-e-1310 28
 Press , the current setting for the upper limit will be
displayed.
 Press the navigation buttons (see chap. 5.10.1) to enter the
upper limit value, the active digit is flashing.
(example)
 Confirm input by .
 Press , the unit will return to the menu
3. How to set tolerance weighing mode
 Press
repeatedly until is displayed.
 Confirm by , will be displayed.
 Select
BEEP by pressing
 Press
, the current setting will be displayed.
 Select desired setting (bp 1, bp 2, bp 3) with and
confirm by pressing .
 Press
repeatedly; weighing system is in tolerance
weighing mode. From here evaluation takes place whether
the goods to be weighed are within the two tolerance limits.