KERN & SOHN VFB 2T-3 - Manual (Page 30)

VFB-BA-e-1310 30
 Loading the system with the load to be added
 Wait for stability display „STABLE“, then press
, the weight value will be
added into a sum memory
 „ACC 1“ is displayed for approx. 2 sec., after that the system returns into the
standard weighing mode.
Next to the weight display „M+“ appears
 Unload the system, the display return s to „0“
 Charge with the second load, wait for the stability display „
STABLE
“
 Press anew, the weight value will also be saved
 „ACC 2“ will be displayed, the total weight will be displayed for approx. 2 sec.
before the system changes into the weighing mode.
 Carry out further weighings in the same way. Ensure that the system is unloaded
between the weighing procedures.
 You can repeat this process until the capacity of the weighing system is
exhausted.
Display of the saved weighing data:
 The system must
be in zero display („ZERO“-is displayed)
 Press , number of weighing, followed by the total weight will be displayed for
2 sec.
Delete weighing data:
 When zero is displayed press
, the number of weighings followed by the
total weight will be displayed for 2 sec. During this display press again.
The data in the summation memory are deleted.
The „M+“ in the display
disappears.