KERN & SOHN VFB 2T-3 - Manual (Page 20)

VFB-BA-e-1310 20
How to carry out linearization:
 Call up menu item
 Acknowledge with .
Ensure that there are no objects on the weighing plate.

 Wait for stability display, then press . When “LoAd 1“ is
displayed, put the first adjustment weight (1/3 max) carefully
in the centre of the weighing platform.
 Wait for stability display, then press . . When “LoAd 2“
is displayed, put the second adjustment weight (2/3 max)
carefully in the centre of the weighing platform.
 Wait for stability display, then press . When “LoAd 3“ is
displayed, put the third adjustment weight (1/3 max) carefully
in the centre of the weighing platform.
 Wait for stability display, then press .
 After the adjustment the balance will carry out a self-test. Err
4 will appear briefly, followed by weighing value. The system
is now in weighing mode.
 Remove weight, „0“ is displayed.
An adjusting error or incorrect adjusting weight will be
indicated by the error message; repeat adjustment
procedure.
After the linearization the weighing system should be adjusted as
follows: