KERN & SOHN VFB 2T-3 - Manual (Page 29)

29 VFB-BA-e-1310
4. Weighing with tolerance range
 Tare when using a weighing container.
 Put on goods to be weighed, tolerance control is started.
Load below specified
tolerance Load within specified
tolerance Load exceeds specified
tolerance
(example) (example) (example)
The tolerance control is not active when the weight is under 20d.
To delete limits, enter “00000 kg“.
8.6 Manual totalizing
With this function the individual weighing values are totalized into the sum memory
by pressing .
 No load may be on the loading fork

The system should be stable (stability display „STABLE“
illuminated)
 The added-up weighing value must be more than 20d.
Menu settings:
„F4 Prt“  „P Prt“