Keri Systems SB-293 Quick Start - Manual (Page 14)

SB-293 Satellite Board
1530 Old Oakland Road, Suite 100 01837-003 Rev. 2.3
San Jose, CA 95112 USA
(800) 260-5265 (408) 451-2520 FAX (408) 441-0309
Web: http://www.kerisys.com E-mail: [email protected]
Page 14 of 16
Quick Start Guide
SB-293
7.2.2 Inputs Table
Please refer to Figure 4 on page 4 for input wiring locations.
• See page 15 for a sample General Purpose Input drawing.
Table 5: Inputs Table
TB-8/TB-9 Inputs Description
TB-8 – Pin 1 GPI 1 a
a. General Purpose inputs can accept either a
normally closed or normally open signal. The type
of signal depends upon the type of input device.
The Doors software is then programmed to accept
that type of input.
TB-8 – Pin 2 common/ground
TB-8 – Pin 3
GPI 2 a
TB-8 – Pin 4 GPI 3 a
TB-8 – Pin 5 common/ground
TB-8 – Pin 6 GPI 4 a
TB-9 – Pin 1
GPI 5 a
TB-9 – Pin 2 common/ground
TB-9 – Pin 3 GPI 6 a
TB-9 – Pin 4 GPI 7 a
TB-9 – Pin 5 common/ground
TB-9 – Pin 6
GPI 8 a