Kenton Pro-SOLO MkII User Manual
Page 7
7
21
AUX 1 minimum value (default: 0)
Range
-27 to +100
- Sets the level for the Auxiliary output when the MIDI controller source is at its minimum.
22
AUX 1 maximum value (default: 100)
Range
-27 to +100
- Sets the level for the Auxiliary output when the MIDI controller source is at its maximum.
23
AUX 1 reset value (default: 0)
Range
-27 to +100
- Sets the level the Auxiliary output will reset to when the PRO-SOLO is powered on and when
it receives a controller reset MIDI command.
Note that minimum can be set above maximum so that the controller works backwards.
24
Key scale to AUX 1(default: 0)
Range
0 to 127
- Sets the amount of key scaling which is applied to the Aux output (for opening the filter up
as you play notes further up the keyboard.
25
LFO to AUX 1 controller (default: 17)
- Sets which Controller will control the LFO depth applied to the auxiliary.
The following can be selected;
Off
[Of]
Pitch bend
[Pb]
Velocity [VL]
Aftertouch
[Af]
MIDI controllers
0 to 120
26
LFO to AUX 1 minimum value (default: 0)
Range
0 to 127
- Sets the level for LFO to AUX modulation when the MIDI controller source is at its minimum.
27
LFO to AUX 1 maximum value (default: 127)
Range
0 to 127
- Sets the level for LFO to AUX modulation when the MIDI controller source is at its maximum.
Note that minimum can be set above maximum so that the controller works backwards.
28
LFO to AUX 1 reset value (default: 0)
Range
0 to +127
- Sets the level the LFO to AUX modulation will reset to when the PRO-SOLO is powered on or
when it receives a controller reset MIDI command.
30
LFO rate / speed (default :80)
Range
0 to 127
- Sets the speed of the LFO.