Kenton Pro-SOLO MkII User Manual

Page 10

Text mode
Original mode

AUX 2 controller number (default: 19)

- Sets which MIDI controller will control pin 3 of the thru socket if Aux 2+3 mode is selected
The following can be selected:

Off

[Of]

Pitch bend

[Pb]

Velocity [VL]
Aftertouch

[Af]

MIDI controllers

0-120

Note that pin 3 will be 0 volts if the data value is less than 64 and 5 volts if 64 and above

Sysex Device Number (default :1)

Range

1 to 16

- Sets the sysex device number for this unit.

The PRO-SOLO will always respond to controller #64 (sustain pedal) with no adjustment
necessary.

If you want to use the Aux 2+3 outputs, you will need a special cable (which Kenton can
supply) which has a din plug on one end and two 3.5mm jacks on the other. The intended
use for aux 2+3 is to use to control the accent & slide our 5 socket kit for the TB-303.

OTHER USEFUL INFO