Kenton Pro-SOLO MkII User Manual
Page 19
19
Power Input
9V DC (regulated or unregulated) – never apply more than 12V
(never use an unregulated supply greater than 9V as
unregulated supplies typically give a higher output than shown)
Power
150mA, 2.1mm plug (centre positive)
MIDI
In,
Thru
(selectable)
Analogue outputs
CV (V/oct or Hz/V)
Gate (Gate or S-trig)
Aux
Digital outputs
Pins 1 & 3 of Thru socket (if selected) off=0 volts on=5 volts
Weight
450g
Dimensions
130 x 97 x 40 mm
D to A conversion
2 x 16 bit high quality / low drift DAC
Non-volatile memory EEPROM (no back-up battery required)
WARRANTY
The PRO-SOLO mkII comes with a 12 month (from purchase date) back to base warranty, (i.e.
customer must arrange and pay for carriage to and from Kenton Electronics).
www.kenton.co.uk
Kenton Electronics Limited
Brookfarm House, Station Road, South Wimbledon, London, SW19 2LP, UK
Tel: +44 (0)20 8544 9200 Fax: +44 (0)20 8544 9300
rev# 5132 e. & o. e. 24
TH
June 2006
SPECIFICATIONS