ClearOne AP10 - Manual (Page 23)

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
APPENDICES
Appendix A: Specifications
Dimensions (LxDxH)
17.25" x 10.25" x 1.75"
43.8 x 26 x 4.5 cm
Weight
7.5 lb/3.4 kg dry
12.6 lb/5.7 kg shipping
Operating Temperature
32–100° F
0–38° C
Humidity
0% to 80%, non-condensing
Power Input Range
Auto-adjusting
100–240VAC; 50/60Hz
Power Consumption
8W typical
Front Panel DIP Switches
Device Identification:
4-position DIP switch
Receive AGC
Auto-Answer
Auto-Disconnect
Self-Adapt
Disconnect on Loop or Loop and
Call Progression
Noise Burst Adapt
Momentary On/Off
Latching On/Off
G-Link In/Out
Proprietary Network
RJ-45 (2), 38.4kbps,
110k
Ω
impedance
Category five twisted-pair cable
20' (6.1 meters) maximum cable
length between two networked
devices
Control/Status
DB-25 female
Inputs: active low (pull to ground)
Outputs: Open collector, 40VDC
max, 40mA each
Unbalanced Transmit and Receive
Telco Line
RJ-11
POTS (plain old telephone service)
or analog extension from a PBX
A-lead supervision provided
Telco Set
RJ-11
Connect analog telephone set
A-lead supervision provided
Transmit Input
Push-on terminal block,
balanced, bridging
Impedance: >20k
Ω
Nominal Level: 0dBu
Maximum Level: 20dBu
Receive Output
Push-on terminal block, balanced
Impedance: <50
Ω
Nominal Level: 0dBu
Maximum Level: 20dBu
Audio Performance
Conditions: Unless otherwise
specified, all measurements are
performed with a 250Hz to 3.5kHz
BW limit (no weighting). Reference
to 0dBu at -15dBm on/off the
telephone line (Receive AGC
disabled).
Frequency Response: 250Hz to
3.5kHz, ±1dB
SNR: >56dB
THD+N: <0.3%
Telco Echo Cancellation
TEC tail time: 31ms
TEC null: 55dB nominal
Approvals
FCC, CSA, CE
Set-up Software
AP-Ware