Canon AXIS 1610 - Manual (Page 19)

AXIS 1610 User’s Manual Section 3: Installation 19
Using ARP in
Windows 95/98, ME
& Windows NT, 2000
Follow the instructions below to set the IP address using ARP:
1. Start a DOS window.
Type the following commands:
Example
The host will return
Reply from 192.168.3.191 ...
or a
similar message. This indicates that the address has been set and
that the communication is established.
Notes: ❏ When using the Windows 95 implementation of ARP, change the
first line to:
arp -s
address>
, where is the IP address of
your Windows 95 host.
❏ When you execute the
ping
command for the first time, you will
experience a significantly longer response time than usual.
❏ By using the
arp -d
command, the static entry in the arp table is
removed from the cache memory of the host.
arp -s
ping
arp -d
arp -s 192.168.3.191 00-40-8c-10-00-86
ping 192.168.3.191
arp -d 192.168.3.191