Specifications, Appendix b – Conair WSB User Manual
Page 99
One Conair Drive
●
Pittsburgh, PA 15202
●
412-312-6000
●
FAX 412-312-6227
●
www.conairnet.com
MODELS
GBM22
GBM31
GBM40
Performance characteristics
Batch size lbs {g}
.882 {400}
.882 {400}
.882 {400}
Maximum throughput lbs/hr
{kg/hr}*
97 {44}
111 {50}
132 {60}
Bin capacity - large bins
ft
3
{liter}
0.4 {11.3}
0.4 {11.3}
0.4 {11.3}
Maximum number of materials
4
4
4
Number of standard dispensing valves†
2
3
4
Number of micro dispensing valves
2
1
0
Control software (# of components)
4 or 12
4 or 12
4 or 12
Dimensions inches {mm}
A - Height above mounting plate
27.25 {693}
27.25 {693}
27.25 {693}
B - Width
21.75 {552.4}
21.75 {552.4}
21.75 {552.4}
C - Depth
21.75 {552.4}
21.75 {552.4}
21.75 {552.4}
D - Controller height
11.25 {285.75}
11.25 {285.75}
11.25 {285.75}
E - Controller width
12.25 {311.15}
12.25 {311.15}
12.25 {311.15}
F - Controller depth
8.19 {208.03}
8.19 {208.03}
8.19 {208.03}
Weight lbs {kg}
Installed
70 {32}
70 {32}
70 {32}
Shipping
90 {41}
90 {41}
90 {41}
Voltage Running load amps
120V/1 phase 50/60 hz
1.0
1.0
1.0
220V/1 phase 50/60 hz
0.5
0.5
0.5
Compressed air requirements
40 psi @ 1 ft
3
/min { 2.8 bars @ 0.47 liters/sec}
1/4 in. NPT fitting
Material filling options
Self-contained vacuum loader
ML8 or Z2HL
Central vacuum receiver
DL8
Hand-fill
flat lid
GRAVIMETRIC BATCH BLENDERS
Autoweigh GBM Series Models
MOUNTING INTERFACE
SPECIFICATION NOTES:
* Maximum throughput rates are based on
using all dispense valves and dispensing no
more than 1.0% colorant and/or additive per
each micropulsing valve. Refer to the selec-
tion guide for more specific throughput infor-
mation.
† The Regrind position features a 1.5-inch
diameter valve to ensure flow or irregularly
shaped material.
If you will be using this blender for central
blending applications, it will be necessary to
use a flow control valve with an air solenoid.
SPECIFICATIONS
TPBS015/0700
CONTROL (REMOTE MOUNTED)
APPENDIX B