Conair WSB - Manual (Page 39)

NOTE: Do not use these features in combination with *82.
*71 and *72 This flag for SPECIAL APPLICATIONS ONLY.
Press (*,7,1) to change the Color setting to be interpreted
as percent of the entire MIX instead of percent of the
Natural. Press (*,7,2) to change the Additive setting in
the same way.
The display will say (CPM -OFF) or (APM -OFF). Press "*" to
toggle flag to (CPM -ON) or (APM -ON). (CPM stands for
Color Percent of Mix, APM for Additive Percent of Mix).
These options has been added for a customer with a unique
requirement.
Leave these flags OFF unless you have specific instructions
to do otherwise.
CAUTION: With flags set, Color and Additive settings
combined must NOT exceed 100 percent. From a practical
standpoint, they should not exceed 20 percent combined.
*74 Press (*,7,4) to set a flag that will cause the system to
stop and the Alarm to activate when MAX weight is exceeded.
This might occur if a valve sticks open or slightly open.
Normally the system recovers automatically from such events
with only the one batch blended incorrectly. Set the flag
only if you want the system to stop and alarm.
Press * key to toggle between (MAX OK ) and (MAX ALARM).
Press EXIT when done.
*75 Press (*,7,5) to set a flag to ALARM if the weigh bin weight
drops more them 20 grams during a cycle. This serves to
detect and report a weigh bin problem, such as material
leaking from the bottom of the bin.
*77 Press (*,7,7) to print a copy of all internal parameters. A
printer must be connected and ready. Four columns will
print since parameters reside in four different locations in
memory: RAM; ROM, both WSB2 and WSB9 default listings; and
EEPROM. Identifying headings print above each columns.
*78 Press (*,7,8, followed by a 5 digit number) to change the
PASSWORD number for entering the PROGRAM mode. The system
is supplied with the number "22222" as the password number.
If you wish to restrict use of this mode to only yourself,
you may make up your own number and enter it here.
If you forget your password number, call us for help.
*82 Press (*,8,2) to produce a precision ratioing of either the
Color or Additive. Press CE (previously *) to toggle
between (P/R OFF), (P/R COL) or (P/R ADD).
If precision rationing is selected, the Color (or Additive)
dispense occurs BEFORE the Natural, instead of after.
Page 40