Vertical Communications 8024S - Manual (Page 77)

Do Not Disturb Condition
This feature keeps calls from ringing at your LCD speakerphone and makes your
station appear to be busy to intercom calls. As a reminder, a station that is set in Do
Not Disturb mode will display this information on the LCD.
· To enable DND, proceed as follows:
1. SELECT OPTIONS.
2. SELECT NEXT until the DND option appears.
3. SELECT DND.
4. SELECT ON.
5. SELECT PREV.
6. PRESS
SPEAKER to end.
· To disable the DND condition,
1. REPEAT the above procedure, BUT SELECT OFF instead of ON
at step 4.
NOTE: Although it does not appear on your screen while Do Not Disturb is
displayed, the right interactive button will activate the Options menu.
· To set a Do Not Disturb condition at your
telephone when a call rings at your station,
1. Hear ringing and notice incoming call informa-
tion in display.
2. PRESS programmed DO NOT DISTURB
button. (See Feature Buttons section on page 48
for programming instructions.)
LCD Speakerphone Station User’s Guide 69
GCA70-281 Other Features
Do Not Disturb
MON 24 12:35
Station With DND Set
Do Not Disturb
ON OFF< PREV
Setting Do Not Disturb