Vertical Communications 8024S - Manual (Page 64)

Volume Control
Setting Current Volume Level
The volume control on your telephone is a multipurpose control you can use to set
the volume (loudness) of the ringer, the speaker, the handset, the headset, and the
group listening mode.
· There are four ringer loudness levels
(plus an off position). Set these levels
as follows:
1. While your telephone is on-hook and idle,
PRESS the
VOLUME UP OR VOLUME
DOWN button once for each change in
loudness you desire. The ringer sounds
once for each change as an example of the
current setting.
NOTE: If you set the ringer to the OFF position, your telephone will sound a short
ring burst once for each call you receive at your station while the ringer is off.
· There are eight speaker loudness levels. Set these levels for
the current call as follows:
1. While on a call and in speakerphone mode, PRESS the
VOLUME UP
OR
VOLUME DOWN button once for each change in loudness that
you desire.
· There are at least eight handset loudness levels that you can
set for the current call as follows:
1. While on a call and in handset mode, PRESS the
VOLUME UP OR
VOLUME DOWN button once for each change in loudness that you
desire.
56 LCD Speakerphone Station User’s Guide
Other Features GCA70-281
Impact SCS Volume Buttons