Vertical Communications 8024S - Manual (Page 34)

Redialing
If the last number you have called is busy or is not answering, you have several
options for redialing. You can redial it once, initiate a repeated dialing of it, or save it
for later redialing using a programmed SAVED NUMBER REDIAL button.
Redial - Last-Dialed Number
· To redial the last-dialed number,
1. PRESS
SPEAKER OR HANG UP handset to disconnect current
ringing or busy tone.
2. DIAL
#
.
3. LISTEN for ringing or busy tone over the telephone speaker.
Automatic Redialing
· To redial the number once a minute for 10
minutes,
1. SELECT ARDL OR PRESS programmed
AUTOMATIC REDIAL button. (See page 53 for
directions on programming an Automatic Redial
button.)
The number will be dialed once a minute for 10 minutes
(INTERCOM light flashes). Listen for ringing or busy tone
over the monitor speaker.
NOTE: You must pick up the handset once the call is connected, or the system will
disconnect the call after 30 seconds.
· To cancel this automatic redial action,
1. LIFT AND REPLACE handset OR, USE the telephone for
some other function.
The INTERCOM light then turns off and the phone returns to idle.
26 LCD Speakerphone Station User’s Guide
Making Calls GCA70-281
918045551212
ARDL SAVE
Automatic Redial Option