Vertical Communications 8024S - Manual (Page 53)

Programming
DSS Numbers
Storing another station extension number at a DSS/BLF programmable location
allows you to monitor that station, dial with the press of one button, or pick up or
hold calls at that station quickly and conveniently.
· To store an intercom extension number as a
DSS number,
proceed as follows:
1. SELECT OPTIONS.
2. SELECT NEXT until DSS appears.
3. SELECT DSS.
4. PRESS programmable button to choose
location.
5. DIAL extension number.
6. PRESS next location button AND STORE next
DSS number.
7. REPEAT the previous step until all
DSS numbers are stored, OR
PRESS
SPEAKER to end.
CAUTION
Do not attempt to program interactive buttons; doing so can cause the
system to make features unavailable. If you inadvertently program interac-
tive buttons, you can retrieve their functions in the following manner:
1. PRESS
INTERCOM
**1
2. PRESS desired interactive button to reprogram
3. DIAL
91
,
92
, or
93
to program buttons from left to right.
LCD Speakerphone Station User’s Guide 45
GCA70-281 Programming
6
Dial Extension
PREV
Designating an Extension