Vertical Communications 8024S - Manual (Page 56)

Feature Access Codes
In addition to the system features which may be programmed using the interactive
buttons (as described in the next section), several other features may be programmed
by using their access codes. The feature codes are programmed like speed dial
numbers and can occupy the same programmable buttons on your telephone.
· To store a system feature access code,
1. SELECT OPTIONS.
2. SELECT NEXT until ADIAL and SDIAL options
appears.
3. SELECT SDIAL OR ADIAL.
4. PRESS programmable button OR dial pad but-
ton (0–9) to choose storage location.
5. PRESS
INTERCOM.
6. DIAL access code associated with feature.
NOTE: Access codes are listed in Appendix C, Feature Access Codes - DSU II
Digital Expandable Systems found on page 75.
7. SELECT SAVE to store the number.
8. REPEAT previous steps until all numbers are
stored, OR SELECT EXIT.
9. PRESS
SPEAKER to end.
As you program numbers, fill in the identification strips on
your telephone.
NOTE: The telephone system allows only one autodial number at a programmable
button; however, you can store an autodial number or feature code at a second
level of a location where a
DSS is already stored; just repeat the programming
procedure.
48 LCD Speakerphone Station User’s Guide
Programming GCA70-281
Select Location
PREV
Choose a Location
Enter Number
PREV
Dial the Access Code