Vertical Communications 8024S - Manual (Page 60)

Special Purpose Feature Buttons
Response Message Button
This program lets you set up a button to be used for making a non-verbal response to
a SOHVA or an intercom call. The response appears in the display of the calling
station.
· To assign a button for nonverbal response:
1. PRESS
INTERCOM AND DIAL
**1
.
2. PRESS the programmable button you want to use for message
access.
3. DIAL
5
.
4. DIAL a message number (
0
through
9
).
NOTE: Programmed messages available for use are created by the system
attendant and are listed in a table on page 43.
5. PRESS
SPEAKER to end.
Transfer Button
This program lets you set up a button to be used for transferring to a third party. Most
often, this feature is used for transferring calls you wish to retain to voice mail.
· To assign a “transfer to voice mail” button:
1. PRESS
INTERCOM AND DIAL
**1
.
2. PRESS the programmable button you want to use.
3. DIAL
6
.
4. DIAL extension number of voice mail.
5. PRESS
SPEAKER to end.
Subdued Off-Hook Voice Announce (SOHVA) Button
You can program a button at your station that you may press to enable the delivery of
a SOHVA call.
52 LCD Speakerphone Station User’s Guide
Programming GCA70-281