Cradlepoint MBR95 User Manual
Page 83
CRADLEPOINT MBR95 | USER MANUAL Firmware ver. 3.2.4
© 2011
CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 81
7.2 Ethernet Manager
The Ethernet Manager provides controls for
your router‘s Ethernet ports. There are five
total ports: one blue WAN port and four
numbered yellow LAN ports. While default
settings will be sufficient in most
circumstances, you have the ability to
control:
Link Speed, MAC addresses, and
Connect Method for the WAN port and Link
Speed for the LAN ports.
7.2.1
Mode
WAN or LAN. The blue port is WAN (Wide Area Network) and the four yellow ports are LAN.
WAN (Wide Area Network) is used to connect to another network such as a hotel or office wired network. The
WAN connection is used as a possible source of internet for the MBR95.
LAN (Local Area Network) is for connecting a computer or similar device directly to the router with an Ethernet
cable.
7.2.2
Link Speed
Default setting is Auto. The Auto setting is preferred in
most cases.
Auto
10Mbps - Half Duplex
10Mbps - Full Duplex
100Mbps - Half Duplex
100Mbps - Full Duplex