Canon ImageCLASS MF8050Cn - Manual (Page 105)

6-21
U
sing the F
ax F
unc
tions
Changing the Fax Settings (Items Specifi ed Using the [Menu] Button)
Change the settings for sending and receiving faxes.
For details on the procedure for setting specifi cations or the
setting items, see the next items.
"Setting procedure for Sending" (
→P.6-21)
"Setting Items for the Send Settings" (
→P.6-21)
"Setting Procedure for Receiving" ( →P.6-23)
"Setting Items for the Receive Settings" (
→P.6-24)
"System settings procedure" ( →P.6-25)
"Setting Items for the System Settings" (
→P.6-26)
Setting procedure for Sending
Specify the settings for sending using the following procedure.
This section describes the procedure for changing the setting
for "ECM Sending" as an example.
OK
Menu
Keys to be used for this operation
1
Press [ ] (Menu).
2
Select with [ ] or [ ],
and then press [OK].
Menu
Common Settings
Copy Settings
Memory Media Settin
Send/Receive Setting
...
3
Select with [ ] or [ ], and then
press [OK].
Send/Receive Settings
Common Settings
Fax Settings
4
Select with [ ] or [ ], and then
press [OK].
Fax Settings
Basic Settings
Send Settings
Receive Settings
Fax Setup Guide
5
Select with [ ] or [ ], and then
press [OK].
Send Settings
ECM Sending
Pause Time
Auto Redial
Check Dial Tone Befo...
6
Select or with [ ] or [ ], and then
press [OK].
ECM Sending
Off
On
* When appears in the screen, you need to select
and press [OK] after specifying the setting.
7
Press [ ] (Menu) to close the menu screen.
The setting is complete.
Setting Items for the Send Settings
The send settings include the following items.
Send/Receive Settings
Common
Settings
Send Settings
"Register Username" ( →P.6-22)
"Change Defaults" ( →P.6-22)
"Sender ID" ( →P.6-22)
Fax Settings
Basic Settings
"Fax No." ( →P.6-22)
"Select Line Type" ( →P.6-22)
"Off hook Alarm" ( →P.6-22)
Send Settings
"ECM Sending" ( →P.6-22)
"Pause Time" ( →P.6-23)
"Auto Redial" ( →P.6-23)
"Check Dial Tone Before Sending" ( →P.6-23)