Canon ImageCLASS MF8050Cn - Manual (Page 108)

6-24
U
sing the F
ax F
unc
tions
6
Select or with [ ] or [ ], and then
press [OK].
ECM Receiving
Off
On
* When appears in the screen, you need to select
and press [OK] after specifying the setting.
7
Press [ ] (Menu) to close the menu screen.
The setting is complete.
Setting Items for the Receive Settings
The receive settings include the following items.
Send/Receive Settings
Common
Settings Receive
Settings
"2-Sided Printing (MF8350Cdn Only)" ( →
P.6-24)
"Receive Data Reduction" ( →P.6-24)
"Received Page Footer" ( →P.6-24)
"Continue Printing When Toner Is Low" ( →
P.6-24)
Fax Settings
Receive
Settings
"ECM Receiving" ( →P.6-24)
"Incoming Ring" ( →P.6-25)
"Remote Receiving" ( →P.6-25)
"Manual/Auto Switch" ( →P.6-25)
2-Sided Printing (MF8350Cdn Only)
You can save paper by printing received documents on both
sides of the paper.
How to display the settings
[ ]
→ → →
→ <2-Sided Printing>
Settings
(Boldface: Default settings)
Off Does not print on both sides of paper.
On Prints on both sides of paper.
Receive Data Reduction
You can reduce the size of images on received documents to
match loaded paper or at a specifi ed ratio.
How to display the settings
[ ]
→ → →
→
Settings
(Boldface: Default settings)
Off Does not reduce the image size.
On
Reduction Mode:
Auto, Preset
: Reduces the image size by
automatically adjusting the reduction ratio.
: Reduces the image size at a ratio
specifi ed in .
Reduction Ratio:
97%, 95%,
90%, 75%
Specify a reduction ratio for when
is set to .
Reduction Direction:
Vertical/Horizontal,
Vertical
: Reduces the image
size in vertical/horizontal direction.
: Reduces the image size only in
vertical direction.
Received Page Footer
You can specify whether to print a received date, day of the
week, time, number, and page number at the bottom of
documents when printing received documents.
How to display the settings
[ ] → → →
→
Settings
(Boldface: Default settings)
Off Prints the documents without the receive information.
On Prints the documents with the receive information.
Continue Printing When Toner Is Low
You can specify whether printing of a document being
received is continued when a toner cartridge needs to be
replaced soon.
IMPORTANT
When is set to
The printed documents may be light or blurred. However, the data is
erased when the documents are printed out, so you cannot print the
same documents again.
How to display the settings
[ ]
→ →
→ → Low>
Settings
(Boldface: Default settings)
Off The machine stops printing.
On The machine continues printing.
ECM Receiving
The ECM (Error Correction Mode) is a function for detecting
and correcting errors during fax communication. Using the
ECM function can diminish receive errors even with a diffi
cult
telephone line.