Placing the tv, Power connection, Antenna connection – Philips 20GX1850 User Manual
Page 4: Battery installation, Pre-installation, Thisisnotarepresentativeoftheactualplugandsocket.), Notprovidedfor/77 model)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Pre-Installation
Placing the TV
• Select a position for the TV near a power outlet and if possible away
from direct sunlight or intense room lighting which will tend to reduce
the clarity of the picture.
• Place the TV on a solid base (e.g. a TV/video cabinet)
• Leave at least 3 cm around each side of the TV for ventilation.
• Do not place the TV set near a radiator or other sources of heat.
• Do not expose the TV set to rain or excessive moisture.
Power Connection
IMPORTANT:
Please refer to the section on Specifications for the correct mains
voltage. (Consult your dealer if the mains supply is different.)
• Connect the TV to the mains supply socket.
(Thisisnotarepresentativeoftheactualplugandsocket.)
Antenna Connection
If the indoor aerial is used, attach it to the TV at the mounting socket on
the backcover and then connect the aerial plug to the antenna socket nr
at the back of the TV.
(Notprovidedfor/77 model)
Connect the aerial plug to the antenna socket nr at the rear of the TV.
Battery Installation
To insert batteries in the remote control handset:
• Remove the battery cover at the back of the remote control handset by
lifting up in the direction of the arrow.
• Insert the two batteries (Type AAA, 1.5 V) into the battery holder as
indicated.
• Replace the battery cover.
Note : To avoid damage from possible battery leakage, remove the
batteries for extended unused period.