Av source selection, Spotisi sound, Stereo sound – Philips 20GX1850 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

10. AV Source Selection

If your TV are connected to other peripherals equipment via the AV inputs, you can view the playback
programmes in the AV channel.

Press the AV button to switch between the AV

mode and the TV mode.

AV channel (AV is between channel 2 and 99 or cl and cl25) can also be selected via the CH + or — button

on the remote control by scrolling through the channel numbers (provided AV channel is not skipped).

11. SpOtisI Sound

(for model 20GX1850 only]

• Press the Spatial button to switch on or off the

special acoustic sound effect.

If you are in the AV mode, you can only select either

STEREO SPATIAL or MONO SPATIAL depending on
which sound mode you are playing back.

SAP SPATIAL

MONO SPATIAL

STEREO SPATIAL

12. Stereo Sound

(for model 20GX1S50 only)

This feature is only applicable if you are receiving BTSC transmission through the antenna socket or playing back

stereo programme via the AV sockets from stereo VCR or laser disc player.

Press the Stereo button to select one of the

following sound : SAP, MONO or STEREO.

Press the Stereo button to switch between

STEREO or MONO sound when you are in the AV

mode.

If you are playing back mono programmes (i.e. you

only connect the Video socket and the Audio L socket),
you must select to the mono sound mode, if not, you

will only hear the sound coming out from one side of
the speaker.

This manual is related to the following products: