Oo o, O o o, Operating the video cassette recorder – Philips 20GX1850 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Operating The Video Cassette Recorder
First you must refer to the operating instructions supplied with your video recorder for connection detaiis.
Switch OFF the TV before connecting the video
recorder.
Connect the TV aeriai cabie to the RF iN on the
video recorder.
Connect one side of the cable supplied with the
video recorder to the RF OUT on the video recorder
and the other side of the cable to the antenna input
nr on the TV.
Refer to the Video Recorder Instruction booklet for the pre-tuned video recorder
signal.
1. Switch on the TV and the video recorder.
2.
Insert a pre-recorded tape into the video recorder
and press the PLAY button on the video recorder.
3.
To select the channel for the video recorder, press
the install button on the TV and then press the
control + button to highlight the M-SKIP mode.
pre-recorded tape
o o o
Install ^
menu
IIANO
TUNER
FINa
I
lA-SKIP U
l
AKIP I
4.
Press the menu button on the TV to select the
M-SKIP mode.
5.
Press the CHANNEL < or > button on the TV to
select the designated channel number.
6. When the video signal is located, press the
control — button to add the channel number into
memory, the display should indicate NO.
Press the install button to exit and stop the video
recorder.
7.
Switch off the TV and the VCR.
o o o
Install
<3
menu
CHANNEL
/
---------\
1 MANUAL-SKIP
.5.1
i (t^l A Video tape signal 17