Philips 20GX1850 - Manual (Page 16)

Menu Operation
The picture and sound settings are pre-set by the factory for ideal viewing, but you can store your own personal
preference using the ‘On Screen Menu'.
• Press the menu button on the Front Control Panel of the TV set or the remote control handset to cycie through
the menu.
o
Install <3 menu
TV Control Panel
or
Remote Control Handset
<3 CONTRAST
tnmar:jinjii...........................-............................................
I' > f S
<3 BWGKTTtSS 0> O COLOUR E>
iii 4>
^_________________________________ / k________________________ J
( \
StEEP-TWER OFF <3 HUE G>
k_________________________________ ) ________________________________ )
f \ /---------------------------------------------------------- > f \
BASS-BOOST ON <3 BALANCE s> O SHARPNESS G>
-^lll ^ill
\
_______________ J
k_________________________________ )
CONTRAST
O
Press the menu button to select CONTRAST.
© Press the control + or — to increase or
decrease the contrast setting.
© If you want to store this setting as your personai
preference, press the install button on the TV set.
Note ; You can store all the settings (contrast,
brightness, colour, hue, sharpness, baiance and bass
boost) at the end of the selections instead of after
each setting.
BRIGHTNESS
O
Press the menu button to select BRIGHTNESS.
© Press the control + or — to increase or
decrease the brightness setting.
© If you want to store this setting as your personal
preference, press the install button on the TV set.
COLOUR
O
Press the menu button to select COLOUR.
© Press the control + or — to increase or
decrease the colour setting.
0 If you want to store this setting as your personal
preference, press the install button on the TV set.
HUE
(For NTSC System Only)
O
Press the menu button to select HUE.
© Press the control + or — to increase or
decrease the coiour tone setting.
0 If you want to store this setting as your personal
preference, press the install button on the TV set.
SHARPNESS
O
Press the menu button to select SHARPNESS.
© Press the control + or — to increase or
decrease the sharpness setting.
© If you want to store this setting as your personal
preference, press the install button on the TV set.
BALANCE (For model 20GX1850 only)
O
Press the menu button to select BALANCE.
© Press the control + or — to select right or left
speaker output.
© If you want to store this setting as your personal
preference, press the install button on the TV set.
BASS BOOST
O
Press the menu button to select BASS BOOST.
© Press the control + or — to switch on or off
the bass boost.
© If you want to store this setting as your personal
preference, press the install button on the TV set.
SLEEPTIMER
O
Press the menu button to select SLEEPTIMER.
© Press the control + or — to increase or
decrease the sleeptimer setting.
With this feature, you can select a time period after
which the TV set will switches to Stand-by mode
automatically. The timer can be set in steps of 15
minutes from OFF up to a maximum of 120 minutes.
Note : At the final minute of the selected time period, a
prompting will be shown on the screen. During the final 30
seconds, the indication bar will begin to count down on the
screen informing you that the TV set is going to switch to
the Stand-by mode. At the end of the countdown, the TV
will switch over to the stand-by mode.
You can switch off the SLEEPTIMER with one of the
following steps
© Select the SLEEPTIMER menu and select the
timer to OFF;
© Switch the TV set to Stand-by mode or
© Switch off the TV set.
16