Oo o, C. reset channels mode, O o o – Philips 20GX1850 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Press the control + or — button to select
one of the following colour systems according to
the respective transmission mode.
AUTO ; PAL M ; PAL N or NTSC
If you select the AUTO mode, the TV will
automatically select the respective colour system
according to the transmission system.
5.
Press the install button to exit from the COLOUR
menu.
o o o
install <3 B> menu
C. Reset Channels Mode
This function enables you to reset
O
all previously skipped channels, © all adjusted fine tuning to normal
position and 0 all adjusted colour system selection back to auto position.
1.
Press and hold the
install
button continuously
for about 2 seconds, to activate the secondary
menu; then press the control + or — button to
highlight the RESET menu.
2.
Press the menu button to activate the RESET
menu.
O O o
install <3
Ci> menu
o o o
Install
I DEMO COI RFSET I
IBESETfcMAMflRS'
I
I___
jSTABT fa>l
3.
Press the control + button to start searching
and reset channels mode.
O O
Install €1
1^
r
(sEARcHiMfi
i 1
A
When the reset channels mode is switched on, it will scroll through all the channels (depending whether your TV
is set to antenna or cable mode). When it had completed resetting, it will exit automatically to channel 2 (for
antenna) or cl (for cable).
11