Philips 46CE8761 - Manual (Page 20)

El
ГйП SELECT
PROG.
к T
^ о
E)
C/P
EF
^ SELECT
PROG.
I’B^ ► nr
A T
:> о
QD
c/p
Searching Video Recorder
signal
(if the Video Recorder is connected via
the aeriai)
Press the piayback button ‘PLAY’ on
the Video Recorder. There must not be
a cassette in the cassette hoider.
To search for and store the Video
Recorder signai in the memory
(recognisabie by a test pattern), you
shouid perform the foiiowing
operations A, B, C, and D on the TV.
A Opening the memory
• Press button A (^). A programme
number starts fiashing in the window.
I VOLUUE СКРП HUE COMTRAST
A A A A - ^
^ c;p bii Э
B Searching Video Recorder signai
• Press button B (ED) briefiy. Channei
numbers now begin to run up in the
window. This stops as soon as a TV
picture is received, if this is not the
Video Recorder signai, then continue
searching by pressing button B (03)
briefiy again.
C Seiecting a programme number
• Seiect an available programme
number by pressing the plus A or
minus V side of button CH/PR.
D Storing the Video Recorder signal in
the memory
• Press button D «».
Playback of Video Recorder
signal
To playback from a video tape select
the programme number under which
you have stored the video signal.
Operation via the TV remote
control
As long as the button (on the side of
the remote control) is kept pressed in,
instructions can be given to the Video
Recorder (from our range).
For the use and functions of the
symbols, see the Operating
Instructions for your Video Recorder.
The functions of these buttons
correspond to those of the buttons on
the Video Recorder.
Headphones
This connection is for headphones with
an impedance of between 8 and 1000
ohms and is of the 6,3 mm jack-type
socket.
If headphones are connected, you can
control the volume ^ with the
A VOLUME V buttons.
Button DUAL I-n for the selection of
another language (if broadcast).
Note. The volume of the headphones
can also be stored under the ‘green’
PP button, see section 'Personal
preference setting of picture and
sound’ for this.
16