Philips turbo drive VR550 - Manual (Page 20)

DVANCED PERATIONS
(C ontinued )
Tape Duplication
Connection
Diagram
Playing VCR
1 Connect the recording VCR (this VCR) and the playing
VCR.
2 Connect the recording VCR (this VCR) to the TV.
Recording VCR (this VCR)
Dubbing from any VHS VCR (or video
camera) to another is simple.
Explanations on this page uses this
VCR as the recording VCR.
Refer also the manual supplied with the
other VCR (for playback).
Make sure....
• You can also use the AUDIOA^'IDEO
input jacks on the front panel to
connect another VCR or video
camera. If you use these jacks on the
front panel, they have the priority
over the ones on the rear panel.
• To record from the AUDIOA^IDEO
IN jacks on the rear panel, make sure
no connection is made to the
AUDIOATDEO input jacks on the
front panel.
• The remote control operation mode
is set correctly for operating your
target component.
- Press VCR to operate the VCR.
- Press TV to operate the TV.
At VCRs
Insert a source tape in the plaj'ing VCR
and a blank tape in the recording VCR.
• If a tape without the record tab is inserted
in the playing VCR, playback automati­
cally starts. In this case, press the STOP
button.
• If the VCR indicator on the recording
VCR (this VCR) does not light up, press
VCR/TV once.
At TV
Turn the channel on the TV to your
video channel.
Select Line Input
Press CH A or T, pointing the remote
control at this VCR. to select the
external line input.
“L-F’ appears when “PJV IN FRONT”
is selected.
“L-I” appears when “A/V IN REAR”
is selected.
Select Tape Speed
Press SPEED, pointing tlie remote
control at this VCR, until the desired
tape speed (SP, SLP) appears on the
display.
Play Back Tape
Press the PLAY button on the playing
VCR.
Record (Copy) Tape
Press REC/OTR, pointing the remote
control at this VCR.
Remember: press the buttons in steps 5
and 6 simultaneously to avoid missing
any of the recording.
20 —