Philips turbo drive VR550 - Manual (Page 12)

ETTING P
(C ontinued )
IMPORTANT
The setup and adjustment proce­
dures explained hereafter are written
under the following conditions:
• You have turned on the TV and
selected the video channel {or
video input).
• You have turned on the VCR.
Clock Setting
There are two ways of setting the clock
— Auto Clock Set and Manual Clock
Set.
Auto Clock Set is only possible when
using this VCR in North America.
Make sure....
• To make each entry within 10
seconds: otherwise, the VCR cancels
the clock setting and you will have to
start over again.
Manual Clock Set
Select Initial Setup Mode
TOir.Df JS^E ai T
1 Press VCR. l^rcT AT cKCOSii^ c;
2 Press MENU.
3 Press
A or T to
select “INITIAL
SET UP" then
press OK/
k .
The Initial Set Up menu appears.
Select Clock Set Mode
Press A or ▼ to
select “CLOCK”
then press
TP re ..
D^Te 01u1‘3
AUTOCt.CC
Fi5CH AUTO
OST AUTO
TiVSZCVE AUTO TOSrrFUSHATTH^NKC-
JOELOPUS^evT__
Set Time * •
'to
TiVE
D^TE 01 or:
iuToac:
OST oil
Press A or
set the time.
“AUTOCLOCK”
is automatically set
to “OFF.”
• Each time you press the button, the set
time change.s by I-minute inteivals. If
you hold the button, the set time
changes by 30-minute intervals.
Press OK/^.
Set Month and Day
1 Press A or T to set the month and
day.
• Each time you press the button, the set
dale changes by 1-day inten als. If you
hold the button, the set time changes
by 15-day intervals.
2 Press OK/^.
Set Year
1 Press A or ▼ to set the year.
• Each time you press the button, the set
date changes by )-year intervals. If
you hold the button, the set time
changes rapidly.
2 Press 6 k />-.
Set Day Saving Time
1 Press A or ▼ to select the Day
Saving Time (D.S.T.) setting you
want.
ON: Select this to activate the day
saving time setting.
OFF: Select this to deactivate the
day saving time setting.
2 Press OK/^.
Start Clock
Press EXIT/STATUS.
The internal clock starts and the normal
TV screen resumes.
Auto Clock Set
Select Initial Setup Mode
enecT AT cfcoìsk :
TO F.OPUSKEOT
1 Press VCR.
2 Press MENU.
3 Press
A or T to
select “INITIAL
SET UP” then
press OK/^.
The Initial Set Up menu appears.
Select Clock Set Mode
Press A or T to
select “CLOCK”
then press OK/
k .
01 M :
autoclco < c : j fcSCK iUTO
OST AUTO
TiVSZO’.E AUTO
TOSETPuSMATThEU^C
TO ELD PUSH E> IT______
Set Auto Clock
1 If “AUTO CLOCK” is "OFF.”
press A or T to set it to “ON."
2 Press OK/^.
Set PBS Channel
1 Press A or T to select the PBS
(Public Broadcasting Sen ice)
channel (“AUTO" or preset channel!
from which the VCR receives the
current time signal.
• Normally select 'AUTO.” The VCR
will find an appropriate channel.
• VTien “AUTO" does not v. ork
correctly, select a PBS dwnne!
manually from preset channel number
2 Press OK/^.
Set Day Saving Time
1 Press A or ▼ to select the Day
Saving Time (D.S.T.i setting you
want.
AUTO: Normally select this.
ON: Select this only when
“AUTO” does not v. ork
correctly.
OFF: Select this to deactivate the
day saving time setting.
2 Press OK/>-.
Set Time Zone
1 Press A or T to select your residen­
tial area.
• Normally select "AUTO." Tlie VCR
will find a proper channel in \ our area.
• ^\Tlen “AUTO" does not v, ork
correctly, select your residential aiea
manually.
2 Press OK/P-.
Start the Clock
1 Press EXlT/STATUS.
2 Press POWER.
The VCR starts setting the internal
clock (“Auto" appears on the
display).
Leave the VCR turned off until the
current time appears on the display .
12 —