Philips turbo drive VR550 - Manual (Page 14)

ASIC PERATIONS
Playback
Make sure....
• Your VCR, TV, and antenna are
connected correctly.
• The remote control operation mode
is set correctly for operating your
target component.
- Press VCR to operate the VCR.
- Press TV to operate the TV.
О пту _______________
1 Turn on the TV.
2 Select the video channel (or video
input).
i'i
< On VCR___________________
Insert a cassette.
The VCR turns on.
• If the record tab on a cassette is removed,
playback will start automatically.
• If a cassette is already in the VCR, turn
on the VCR.
Start Playback
Press PLAY ►.
• When you want to play back the same
tape repeatedly, press and hold PLAY ►
for more than 5 seconds. (See "Repeat
playback" on page 15.)
To rapidly locate a particular
scene
Press ►► or ◄◄ during playback. (No
sound comes out.)
To resume playback, press PLAY ►
again.
• If ►► or is held down for more than
2 seconds, simply releasing it will cancel
the search.
To stop playback
Press STOP ■.
To rewind the tape
Press ◄◄ when the tape is not
running.
To fast forward the tape
Press ►► when the tape is not running.
Recording
When using this VCR, an index mark is
always marked at the beginning of
every' recording. This index marks
make it easier for you to search for the
beginning of the recordings (see “Index
Search” (>i-P.16).)
Make sure....
• The record tab on the cassette is not
removed.
• Your VCR, TV, and antenna are
connected correctly.
• The remote control operation mode
is set correctly for operating your
target component.
- Press VCR to operate the VCR.
- Press TV to operate the TV.
О пту _____________________
1 Turn on the TV.
2 Select the video channel (or video
input).
On VCR___________________
Insert a cassette v/ith the record tab in
place.
The VCR turns on.
• If a cassette is already in the VCR, turn
on the VCR.
To rewind the tape, press
Select Tape Speed__________
Press SPEED until the desired tape
speed (SP, SLP) appears on the display.
Select a Channel____________
Press CH A / T or Number buttons to
select the channel to record.
• If you use a Cable box or DBS tuner,
select the Cable box or DBS tuner output
channel.
Start Recording_____________
Press REC/OTR.
To pause recording
Press STILL/SLOW !► briefly (or
STILL/PAUSE
II on the front panel).
To resume recording, press the same
button again.
To stop recording
Press STOP ■.
To watch another TV
programme while recording
1 Press VCR/TV so that the VCR
indicator goes off from the display.
2 Select a different channel you want
to v/atch on the TV.
You can watch the programme of the
selected channel on the TV. without
affecting recording on the VCR.
• If you IOC u Cable box or DBS tuner, you
cannot watch another programme u htk
recording.
Erase protection
Cassettes have the record tab to ensure
that recordings are not accidentally
erased.
To prevent accidental erasure:
Break off the record tab
with a
screwdriver.
♦ Ч
To record again:
Cover the opening with adhesive tape.
Adhesive tape
To eject the tape
Press EJECT A.
14-