Philips turbo drive VR550 - Manual (Page 16)

DVANCED PERATIONS
Index Search Using On-Screen Display Stabilizing Playback Quality
You can locate an index marked at the
beginning of each recording on a tape
recorded on this VCR (or an indexed
tape).
Press INDEX or INDEX
repeatedly before starting play.
Rapid forward or reverse search
begins.
When it finds the designated index,
playback starts automatically.
• Locate an index number by pressing the
button repeatedly, indicating how many
index marks ahead of or behind that
recording you want is from the tape's
curent position.
• Up to ±9th index mark from the current
position on the tape can be located.
'rLCCT A.T C-COScKCK
•OSSCSEEM'.'OCE C'i Ti"caFcCSPceo
v.ciOST;eL'2E'=! off
P.CTuPc
TO£:.DFUgK£>J
You can display the VCR operating
status on the TV screen.
For the information about what you can
see on the TV screen, see page 6.
Select VCR Set Up Mode
1 Press VCR.
2 Press MENU.
3 Press
A or ▼ to
select “VCR SET
UP” then press
OK/
k .
The VCR Set Up menu appears.
Select On-Screen Mode______
1 Press A or ▼ to select “ON
SCREEN MODE."
2 Press OK/»-.
Each time you press the button, the
setting changes.
ON:
When you press a tape running
button (Stop, Play, etc.), the VCR
status appears for 5 seconds.
COUNTER:
When you press a tape running
button, the VCR operating status
appears for 5 seconds.
After 5 seconds, the VCR status
disappears except the time counter.
OFF:
The VCR operating status does not
appear even if you press a tape
running button.
Finish Settinn______________
Press EXIT/STATUS.
To display the VCR status on the TV
screen manually, press EXIT/
STATUS. The VCR status appears for
about 5 seconds.
• If “ON SCREEN MODE" is set to
“OFF.” no VCR status appears though
you press EXIT/STATUS.
\ C£0-T.'-t iCtP
P.zriri r
TOG .D.-oi-ie
With this function, y ou can correct
vertical vibration while playing back a
tape recorded in SLP mode.
Select VCR Set Up Mode
1 Press VCR.
2 Press MENU.
3 Press
A or ▼ to
select “VCR SET
UP” then press
OK/»-.
The VCR Set Up menu appears.
Set Video Stabilizer_________
1 Press A or ▼ to select “VIDEO
STABILIZER.”
2 Press OK/»-.
Each time you press the button, the
setting changes.
ON:
Select this to activate X’ideo
Stabilizer.
OFF:
Select this to cancel Video Stabi­
lizer.
Finish Setting_____________
Press EXIT/STATUS.
Notes;
• This function has no ct/LCt on a tape
recorded in SP mode.
• ^ fter watching a tape using this
function, make sure to cancel this
function.
16 —