Philips FW391C - Manual (Page 18)

Clock Setting Timer Setting
m
3
(3
Setting the clock
The clock will display in 12-hour mode, e.g. 1 PM or 12 AM.
1 Press CLOCK.
“ nF.’lJu
am " starts flashing.
2 Set the hour with PRESET T or A.
3 Set the minute with TUNING l◄◄or►►l .
4 Press CLOCK again to store the setting.
The clock starts running.
Note:
- When a power interruption occurs, the clock settings are
erased, and" lc':Ou
am ” will flash on the display.
Setting the Tinier
• The system can switch on to TUNER or CD mode
automatically at a preset time. It can serve as an alarm to
wake you up. A half an hour after the preset time, the
system will return to the standby mode if no button is
pressed.
• Before setting the timer, make sure the clock is set correctly.
• The timer works only once for each setting.
• The volume of the timer will be at the last setting
before the set is switched off.
To stop the TIMER
• Press TIMER ON»OFF on the set.
The TIMER is now off.
To start the TIMER again
• Press TIMER ON»OFF on the set.
— The display will show the last set start time of the
TIMER and its flag.
The TIMER flag remains lit.
Note:
1. If the source selected is TUNER, the last tuned frequency
will be switched on.
2. If the source selected is CD, the first track of the last
selected disc will be played. If the CD trays are empty, the
TUNER source will be selected instead.
Timer Setting
1 Press TIMER SET.
— The TIMER flag flashes.
2 Press PRESET A to select the desired sound source.
-* The display will switch as follows:
TUNER-* CD-TUNER.
3 Press TIMER SET to confirm your selection.
— The display will show “ EJN IS:00 am " and" lc':Clu
am " flashes.
4 Press PRESET T or A to set the hour for the timer to start.
5 Press TUNING I-<^or^>-l to set the minutes for the
timer to start.
6 Press TIMER SET to store the start time.
— The TIMER is now set.
— The TIMER flag remains lit.
16