Philips FW391C - Manual (Page 12)

Operating the System
Important:
Before you begin operating the system, complete the
preparation procedures. The set is in the standby mode when
the AC power plug is connected to the wail outlet and" '¿'-uu
am " flashes on the display.
Switching the system ON
• Press POWER ON or SOURCE (or CD, TUNER, TAPE or
AUX on the remote control).
Switching the system to standby mode
• Press POWER ON again (or (i) on the remote control).
Selecting the Sound Source
• Press SOURCE to select either TUNER, CD, TAPE or AUX
(or CD, TUNER, TAPE or AUX on the remote control).
The display indicates the selected sound source.
You can also select the sound source directly by selecting the
respective PLAY button or 3 CD DIRECT PLAY buttons for CD or
the PRESET, BAND or TUNING button for TUNER.
Note:
For AUX source, ensure that you have connected the audio left
and right outputs of the external equipment (TV, VCR or Laser
Disc player) to the AUX IN sockets at the rear of the set.
Volume Adjustment
Turn VOLUME right or left (or press VOLUME + or — on the
remote control) to increase or decrease the sound level.
For Personal Listening
Connect the headphones jack to the ifii socket (3.5 mm) at the
front of the set. The speakers will be muted.
Digital Sound Control (DSC)
• To enjoy a special sound effect, press JAZZ ( ^ ) , CLASSIC
( . i ^ ) , R O C K ( . ; ^ ) o r P O P ( / ) .
Optimal Sound
• Press OPTIMAL to hear the sound setting that is tuned to
the acoustics of the supplied speakers.
Dynamic Bass Boost (DBB)
• Press DBB to enhance the bass response.
— The DBB flag lights up.
Incredible Sound (formode!FW392C only}
• In additional to the other sound settings,
you can switch on or off the incredible
surround sound feature by pressing
INCREDIBLE SOUND.
— This creates a surround sound effect
even if the speakers are positioned close to the system.
The sound becomes "incredibly" spatial.
— The INCREDIBLE SOUND button lights up.
Demo mode
The system has a demonstration mode that shows the various
features offered by the system.
• Press DEMO to switch on the demonstration.
— The display will show "NCLC um C TQ THE
nuilIO
NuRLJj", then a demonstration of the various features
will follow.
• Press DEMO again or POWER ON to stop the
demonstration mode.
INCREDIBLE
SOUND
10