Formatting the sdhc card, Modifying user information – Interlogix TruVision IP Open Standards Outdoor Cameras User Manual User Manual
Page 43

4BChapter 5: Camera management
TruVision Outdoor IP Camera User Manual
39
To delete a user:
1. Click the
User management
folder to open its window.
2. Select the
Delete
button. The user management window appears.
Note: Only the administrator can delete a user.
3. Click the desired user in the list. Select
Delete
.
Confirm that you want to delete the user.
4. Click
OK
to save the changes.
Modifying user information
You can easily change the information about a user such as their name,
password or computer ID.
To modify user information:
1. Click the
User management
folder to open its window.
2. Select the user.
3. Click the
Modify
button The user management window appears.
4. Change the information required.
Note: The user “Admin” can only be changed by entering the admin
password.
5. Click
OK
to save the changes.
Formatting the SDHC card
Use the HDD Configuration window to display the capacity and free space
available on the SDHC card in the camera as well as the working status of the
HDD. You can also format the card.
Note: This function is not available for bullet cameras.
Before formatting the HDD (the SDHC card) stop all recording. Once formatting
is completed, reboot the camera as otherwise the device will not function
properly.
When the card becomes full, it overwrites the oldest recordings.