Interlogix TruVision IP Open Standards Outdoor Cameras User Manual - Manual (Page 28)

2BChapter 3: Network and streaming configuring
24 TruVision Outdoor IP Camera User Manual
2. Click the PPPoE setting subfolder to open its window and check Enable
PPPoE . Enter the user name and password. Click Save to save changes.
3. Click the DDNS setting subfolder to open its window and check Enable
DDNS . Enter either IP server or DynDNS as protocol.
If DynDNS is selected, enter the user name and password registered to the
DynDNS web site. The domain name is that of the DynDNS web site. Click
Save to save changes and return to the “Network settings” menu.
4. Click the E-mail setting subfolder to open its window and enter the SMTP
server, SMTP port, user name and password and the e-mail sender and
receiver addresses. Click
Save to save changes.