Vertical Communications TeleVantage 7.5 - Manual (Page 99)

C HAPTER 7. I NSTALLING I NTEL D IALOGIC B OARD D RIVERS 7-27
5. In the Value field, enter Spandti.prm .
6. Click OK .
7. Repeat for each additional Robbed Bit T1 trunk board
8. In Windows Explorer, navigate to Program Files\Dialogic\Data\Spandti.prm . Open
the file in Notepad.
9. Edit the file by adding the following lines:
0014 01; ESF framing
0020 01; B8ZS
10. Save and close the file.
If you have Internet telephony boards, go to the next section. Otherwise, perform any other
required board-specific configuration steps described in the table on page 7-19. When you are
done, go to “Test-starting the Intel Dialogic drivers” on page 7-33.