Vertical Communications TeleVantage 7.5 User Manual
Page 129
A
PPENDIX
B. C
ONFIGURING
I
NTEL
D
IALOGIC
B
OARD
ISDN P
ARAMETERS
B-3
For information about using the ISDIAG menu to test calls and generate trace information, see
the following document on the Intel Dialogic technical support website:
http://resource.intel.com/telecom/support/appnotes/isdn03.htm
To run ISDIAG
1.
On the TeleVantage Server PC, open a command prompt window.
2.
Go to the following directory:
C:\Program Files\Dialogic\BIN
Note:
This is the default directory. If you specified a different directory for the Intel
Dialogic drivers when you installed them, go to that location instead.
3.
Enter
ISDIAG
. The syntax for launching ISDIAG appears, as shown in the next figure.
4.
Enter
ISDIAG
followed by the appropriate codes. For example:
ISDIAG 1 1 t s v
Doing this launches ISDIAG to test the first channel on the first board, where the board
is a T1 board on an SCbus connection, using the voice option.