Vertical Communications TeleVantage 7.5 - Manual (Page 178)

I NSTALLING I NTEL T ELEPHONY C OMPONENTS I NDEX -4
connecting 6-9
ISDN PRI T1 trunk boards
connecting 6-9
ISDN PRI T1/E1
troubleshooting problems C-15
ISDN trunks
configuring 7-35
ISDN Two B-Channel Transfer test utility
using B-9
M
media load
changing for DM3 board F-1
MSI/x analog station boards
connecting 6-12
R
reporting problems C-1
Robbed Bit T1
signaling 7-35
troubleshooting problems C-14
Robbed Bit T1 Experimenter
about 7-35
installing 7-36
placing and receiving calls 7-41
testing individual bit states 7-42
Robbed Bit T1 trunk boards
connecting 6-9
S
SIP phones
connecting 6-11
static warning 6-3
system
about 1-2
T
T1 trunks
configuring using Robbed Bit T1 Experimenter 7-35
using extended superframe service 7-26
telephony resources
providing
via Intel DIalogic boards 2-2
via Intel HMP 2-2
test-starting
DSIx drivers 7-34
Intel Dialogic drivers 7-33
Toshiba digital phones
connecting 6-17
Toshiba digital station boards
connecting 6-17
installing 6-6
troubleshooting
DM3 board problems C-3
Intel Dialogic problems C-1
ISDN lines B-1
ISDN PRI T1/E1 problems C-15
Robbed Bit T1 problems C-14
specific problems
all phones ring when Dialogic drivers are started
C-12
analog trunks do not disconnect properly when
calls terminate C-17
audio problems on conference calls on
MSI/x-GBL boards C-13
DCM fails to detect a D/41ESC board C-7
DCM fails to detect a DM3 board C-3
DID numbers stop working after changes to a
Robbed Bit T1 line C-15
DSIx board drivers do not start C-13
echo heard on IP phone son calls that came in on
D/120JCT-LS analog trunk board C-12
error Stations not responding on DISIx analog
station board C-3
in the Device Monitor, stations or trunks are not
in the expected order C-10
Intel Dialogic drivers do not start C-2
Intel Dialogic drivers may not start after moving
or changing a Dialogic DM3 telephony board
C-9