Vertical Communications TeleVantage 7.5 - Manual (Page 179)

I NDEX -5
Intel Dialogic Service fails to start when a PCI
board is installed in a PC with the Phoenix
BIOS
C-9
ISDN calls work via the Dialogic Makecall
Utility but fail via phone system C-16
no audio or one-way audio on calls on DSIx
boards C-13
obtaining details about your T1 span C-14
PCI boards not recognized at Server startup C-8
Server fails to detect some or all stations on
HDSI/x analog station board C-3
System Event Log reports ‘Error 5aa’ or
‘PEB/SCBUS cable missing’ and Intel
Dialogic drivers fail to start
C-11
T1 trunk shows status of ‘No loop current’ in
Device Monitor C-17
testing and optimizing ISDN PRI T1/E1 spans
C-15
troubleshooting mixed CTbus board systems C-8
trunk boards
connecting 6-7
U
uninstalling
Intel Dialogic drivers 7-4
upgrading from a previous version
scheduling an upgrade 7-2
using
D-Channel ISDN trace utility B-5
Dialogic Makecall Utility B-2
Dialogic System Information Output utility C-2
Intel Dialogic Configuration Manager D-1
ISDIAG utility B-2
ISDN Two B-Channel Transfer test utility B-9
this manual 1-2
utilities
D-Channel ISDN trace utility B-5
Dialogic Makecall Utility B-2
Dialogic System Information Output C-2
ISDIAG utility B-2
ISDN Two B-Channel Transfer test utility B-9
V
voice resources
about A-1
by Intel Dialogic telephony board A-1
conserving A-4
dedicated A-3
gaining extra A-5
identifying if you need more A-5
making dedicated resources shared A-4
maximum possible use A-4
shared A-3
viewing performance counters A-4
VoIP phones
connecting 6-11
W
where to get help 1-2