IC Realtime Specialty: 4-CH Mobile DVR - Manual (Page 54)

54
Figure 4-39
4.9.4 Activate Patrol (tour)
In
X341H341H341H311H311H311H318H
Figure 4-36
X
, input patrol (tour) number in the No. blank and click patrol button
4.9.5 Pattern Setup
In
X342H342H342H312H312H312H319H
Figure 4-36
X
, click pattern button and then click “begin” button. The interface is shown as in
X343H343H343H313H313H313H320H
Figure 4-40. Then you can go to
X344H344H344H314H314H314H321H
Figure 4-33
X
to modify zoom, focus, and iris.
Go back to
X345H345H345H315H315H315H322H
Figure 4-40
X
and click “end” button. You can memorize all these operations as pattern
1.
Figure 4-40
4.9.6 Activate Pattern Function
In
X346H346H346H316H316H316H323H
Figure 4-37, input mode value in the No. blank, and click pattern button.
4.9.7 Auto Scan Setup
In
X347H347H347H317H317H317H324H
Figure 4-36, click border button. The interface is shown as in
X348H348H348H318H318H318H325H
Figure 4-41
X
.
Please go to
X349H349H349H319H319H319H326H
Figure 4-33
X
, use direction arrows to select camera left limit
Then please go to
X350H350H350H320H320H320H327H
Figure 4-41
X
and click left limit button
Repeat the above procedures to set right limit.
Figure 4-41