IC Realtime Specialty: 4-CH Mobile DVR - Manual (Page 53)

53
z Pattern
z Auto scan
z Auto pan
z Flip
z Reset
z Page switch
Figure 4-37
Note:
z
Preset, tour and pattern all need the value to be the control parameter. You can define it as
you require.
z You need to refer to your speed dome user’s manual for Aux definition. In some cases, it
can be used for special process.
z The following setups are usually operated in the
X332H332H332H302H302H302H309H
Figure 4-33,
X333H333H333H303H303H303H310H
Figure 4-36 and
X334H334H334H304H304H304H311H
Figure 4-37 .
4.9.1Preset Setup
In
X335H335H335H305H305H305H312H
Figure 4-33
X
, use eight direction arrows to adjust camera to the proper position.
In
X336H336H336H306H306H306H313H
Figure 4-36, click preset button and input preset number. The interface is shown as in
X337H337H337H307H307H307H314H
Figure
4-38
X
.
Now you can add this preset to one tour.
Figure 4-38
4.9.2 Activate Preset
In
X338H338H338H308H308H308H315H
Figure 4-37
X
, please input preset number in the No. blank, and click preset button.
4.9.3 Patrol setup (Tour Setup)
In
X339H339H339H309H309H309H316H
Figure 4-36, click patrol button. The interface is shown as in
X340H340H340H310H310H310H317H
Figure 4-39
X
.Input preset number
and add this preset to a patrol (tour). For each patrol (tour), you can input max 80 presets.