IC Realtime Combo Series: 8 Channel DVR with built-in 19 LCD monitor - Manual (Page 40)

31
Figure 4-14
4.4.2.3 Priority
Please note the activation snapshot has the higher priority than schedule snapshot. If you
have enabled these two types at the same time, system can activate the activation snapshot
when alarm occurs, and otherwise system just operates the schedule snapshot.
4.4.3 Image FTP
In Network interface, you can set FTP server information. Please enable FTP function and
then click save button. See Figure 4-15.
Please boot up corresponding FTP server.
Please enable schedule snapshot (Chapter 4.4.2.1) or activation snapshot (Chapter 4.4.2.2)
first, now system can upload the image file to the FTP server.
Figure 4-15
4.5 Detect
4.5.1 Go to Detect Menu
In the main menu, from Setting to Detect, you can see motion detect interface. See
X302H302H302H
Figure
4-16
X
. There are three detection types: motion detection, video loss, camera masking.
4.5.2 Motion Detect
Detection menu is shown as below. See
X303H303H303H
Figure 4-16
X
.
z Event type: from the dropdown list you can select motion detection type.
Please input the
corresponding information
here, if you just upload the
image FTP.