IC Realtime Combo Series: 8 Channel DVR with built-in 19 LCD monitor - Manual (Page 22)

13
3 Installation and Connections
Note: All the installation and operations here should conform to your local
electric safety rules.
3.1 Check Unpacked Device
When you receive the combo DVR from the forwarding agent, please check whether there is any
visible damage. The protective materials used for the package of the combo DVR can protect
most accidental clashes during transportation. Then you can open the box to check the
accessories.
Please check the items in accordance with the list on the warranty card (Remote control is
optional). Finally you can remove the protective film of the combo DVR.
Note
Remote control is not a standard accessory and it is not included in the accessory bag.
3.2 About Front Panel and Real Panel
For detailed information of the function keys in the front panel and the ports in the rear panel,
please refer to the appendix for detailed information.
The model in the front panel is very important; please check according to your purchase order.
The label in the rear panel is very important too. Usually we need you to represent the serial
number when we provide the service after sales.
3.3 Device Installation
The series product supports two installation modes: desktop/ wall-mount. The default installation
is the desktop type. Please refer to the following figure. See Figure 3-1.
Please purchase the wall mount accessories for wall mount type installation.
Figure 3-1