Heli-Max HMXE0800 - Manual (Page 3)

4. You must check the operation of the model before every
fl ight to insure that all equipment is operating and that the
model has remained structurally sound. Be sure to check
linkages or other connectors often and replace them if they
show any signs of wear or fatigue.
5. If you are not an experienced pilot or have not fl own
this type of model before, we recommend that you get the
assistance of an experienced pilot in your R/C club for
your fi rst fl ights. If you’re not a member of a club, your local
hobby shop has information about clubs in your area whose
membership includes experienced pilots.
We, as the manufacturer, provide you with a top quality,
thoroughly tested helicopter and instructions, but
ultimately the quality and fl yability of your fi nished model
depends on how you build it; therefore, we cannot in any
way guarantee the performance of your completed model,
and no representations are expressed or implied as to the
performance or safety of your completed model.
Remember: Take your time and follow the instructions to
build a safe and enjoyable model.
ITEMS REQUIRED
The following items must be purchased separately:
• (8) AA Alkaline cells (SANP3500 AA 4-pack x2)
FLIGHT BATTERY
Hovering, Basic Aerobatics and 3D
• GPMP0406 11.1V 2000mAh Battery LiPo Flight Battery
• GPMP0617 Great Planes ElectriFly LiPo 11.1V 2100mAh
20C
Power
Hovering, Basic Aerobatics, Mild 3D and Aggressive 3D
• GPMP0520 Great Planes LiPo 11.1V 2200mAh 25C T-Rex
MX450
Heli
• FPWP0327 FlightPower LiPo 11.1V 2170mAh 25C EVO25
3S
Balance
Also required is an appropriate battery charger for your
fl ight battery.
KIT INSPECTION
Before starting assembly, take an inventory of the AXE 400
3D RTF to make sure it is complete, and inspect the parts
to make sure they are of acceptable quality. If any parts
are missing or are not of acceptable quality, or if you need
assistance with assembly, contact Product Support. When
reporting defective or missing parts, use the part names
exactly as they are written in the Kit Contents list.
Heli-Max Product Support:
3002 N. Apollo Drive, Suite 1
Champaign, IL 61822
Telephone: (217) 398-8970, ext. 5
Fax: (217) 398-7721
E-mail: [email protected]
WARRANTY
Heli-Max ™ guarantees this kit to be free from defects in both
material and workmanship at the date of purchase. This
warranty does not cover any component parts damaged by
use or modifi cation. In no case shall Heli-Max’s liability
exceed the original cost of the purchased kit. Further,
Heli-Max reserves the right to change or modify this warranty
without notice.
In that Heli-Max has no control over the fi nal assembly
or material used for fi nal assembly, no liability shall be
assumed nor accepted for any damage resulting from the
use by the user of the fi nal user-assembled product. By the
act of using the user-assembled product, the user accepts
all resulting liability.
If the buyer is not prepared to accept the liability
associated with the use of this product, the buyer is
advised to return this kit immediately in new and unused
condition to the place of purchase.
To make a warranty claim, send the defective part or item to
Hobby Services at this address.
Hobby Services
3002 N. Apollo Dr., Suite 1
Champaign, IL 61822
USA
Include a letter stating your name, return shipping address,
as much contact information as possible (daytime telephone
number, fax number, e-mail address), a detailed description
of the problem and a photocopy of the purchase receipt.
Upon receipt of the package the problem will be evaluated
as quickly as possible.
3