GTCO Roll-Up II - Users Guide - Manual (Page 30)

Roll-Up II 30
9. If GTCOTEST indicates that the digitizer is functioning properly, check your software
application setup and SuperSet code for accuracy. If you have any questions about
your results or need assistance running GTCOTEST, contact our Technical Support
Department.
Roll-Up II Technical Specifications
Technology
Electromagnetic
Resolution Up to 2000 lpi (lines/inch) or 100 lpmm (lines/millimeter)
Lock Height 0.5 inch (12.7 mm)
Coordinate Origin Selectable (Factory default: lower left corner)
Recommended Roll Diameter 8 inches (200 mm)
Operating Temperature
41° to 115° F (5° to 46° C)
Storage Temperature -4° to 158° F (-20° to 70° C)
Humidity Range 0% to 100%, non-condensing
Operating Modes Point, Line, Continuous, Line Incremental, Continuous
Incremental, Remote Request
Baud Rates 1200, 2400, 4800, 9600, 19200 and 38400
Cursor Switches Elastomeric keypad, rated life over 1 million actuations
Emulations GTCO T5A, CalComp 9100/9500, Summagraphics
Microgrid and ID Series
Power Supply Output voltage +9VDC at 500mA, Center positive
Interface RS-232C (See Figure 4)
Adapter 9- to 25-pin (See Figure 5)