GTCO Roll-Up II - Users Guide - Manual (Page 24)

Roll-Up II 24
retained even if the unit is powered off or reset. However, if another SuperSet code is
entered, this temporary configuration is lost and cannot be recalled without configuring
Roll-Up II again.
To save the configuration in a user-definable location:
Choose and then select a two digit value ranging from 90 to 99 on the SuperSet Menu.
You will hear four short tones when you successfully save a configuration. Saved
configurations allow you to switch between applications quickly. Locations 90 through 99
retain configurations even if Roll-Up II is turned off or reset.
8. The configuration setup is now complete. Store the Custom Configuration Menu
card in the tablet housing.
Custom Configuration Menu
Click on menu blocks for description of each menu option group:
Controlling the Alarm
Disable the alarm (for transducer pressed) if you do not want to hear it while using the
digitizer. When the alarm is off, you will still hear diagnostic and menu-related tones.
To turn the alarm on and off:
 Select the block on the SuperSet Menu.