Great Planes Seawind .60-.91 ARF - GPMA1360 - Manual (Page 5)

• Photos and sketches are placed before the step they
refer to. Frequently you can study photos in following steps
to get another view of the same parts.
• The Great Planes Seawind ARF is factory-covered with
Top Flite MonoKote film. Should repairs ever be required,
MonoKote can be patched with additional MonoKote
purchased separately. MonoKote is packaged in six-foot rolls,
but some hobby shops also sell it by the foot. If only a small
piece of MonoKote is needed for a minor patch, perhaps a
fellow modeler would give you some. MonoKote is applied with
a model airplane covering iron, but in an emergency a regular
iron could be used. A roll of MonoKote includes full
instructions for application. Following is the color used on this
model and order number for a six foot roll.
White – TOPQ0204
• The stabilizer and wing incidences and engine thrust
angles have been factory-built into this model. However,
some technically minded modelers may wish to check these
measurements anyway. To view this information visit the
web site at
www.greatplanes.com and click on “Technical
Data.” Due to manufacturing tolerances which will have little
or no effect on the way your model will fly, please expect
slight deviations between your model and the published
values.
Replacement parts for the Great Planes Seawind ARF are
available using the order numbers in the Replacement Parts
List that follows. The fastest, most economical service can be
provided by your hobby dealer or mail-order company.
To locate a hobby dealer, visit the Hobbico web site at
www.hobbico.com. Choose “Where to Buy” at the bottom of the
menu on the left side of the page. Follow the instructions
provided on the page to locate a U.S., Canadian or International
dealer. If a hobby shop is not available, replacement parts may
also be ordered from Tower Hobbies
® at
www.towerhobbies.com, or by calling toll free (800) 637-6050.
Parts may also be ordered directly from Hobby Services by
calling (217) 398-0007, or via facsimile at (217) 398-7721,
but full retail prices and shipping and handling charges will
apply. Illinois and Nevada residents will also be charged
sales tax. If ordering via fax, include a Visa
® or MasterCard ®
number and expiration date for payment.
Mail parts orders and payments by personal check to:
Hobby Services
3002 N. Apollo Drive, Suite 1
Champaign, IL 61822
Be certain to specify the order number exactly as listed in
the Replacement Parts List. Payment by credit card or
personal check only; no C.O.D.
If additional assistance is required for any reason contact
Product Support by e-mail at
[email protected],
or by telephone at (217) 398-8970.
Replacement Parts List
Order Number Description How to Purchase
Missing pieces Contact Product Support
Instruction manual Contact Product Support
Full-size plans Not available
GPMA2510 Wing Set w/o Tips Contact Hobby Supplier
GPMA2511 Wing Tips Contact Hobby Supplier
GPMA2512 Fuselage Contact Hobby Supplier
GPMA2513 Stabilizer w/Elevator Contact Hobby Supplier
GPMA2514 Stab Tube/Rods Contact Hobby Supplier
GPMA2515 Water Rudder w/Post Contact Hobby Supplier
GPMA2516 Rudder Contact Hobby Supplier
GPMA2517 Canopy Contact Hobby Supplier
GPMA2518 Cowl Contact Hobby Supplier
GPMA2519 Landing Gear Contact Hobby Supplier
GPMA2520 Nose Gear Doors Contact Hobby Supplier
GPMA2521 Spinner Contact Hobby Supplier
1" = 25.4mm (conversion factor)
METRIC CONVERSIONS
ORDERING REPLACEMENT PARTS
5
1/64" = .4 mm
1/32" = .8 mm
1/16" = 1.6 mm
3/32" = 2.4 mm
1/8" = 3.2 mm
5/32" = 4.0 mm
3/16" = 4.8 mm
1/4" = 6.4 mm
3/8" = 9.5 mm
1/2" = 12.7 mm
5/8" = 15.9 mm
3/4" = 19.0 mm
1" = 25.4 mm
2" = 50.8 mm
3" = 76.2 mm
6" = 152.4 mm
12" = 304.8 mm
18" = 457.2 mm
21" = 533.4 mm
24" = 609.6 mm
30" = 762.0 mm
36" = 914.4 mm