Great Planes Revolver GP/EP ARF 59" - GPMA1018 - Manual (Page 24)

24
❏
3. Glue the included foam block to the front underside of
the canopy hatch using epoxy or foam safe CA glue.
❏
4. Fit the canopy hatch in place and install it using two
4-40 x 3/4" [19mm] machine screws, two #4 fl at washers, and
two #4 lock washers.
❏
5. The spinner includes a bushing for use with crankshafts
or prop adapters that have a 5/16" [7.9mm] thread or 1/4"
[6.3mm] thread. Use the bushing that fi ts your prop shaft.
Install the spinner backplate, propeller, and threaded spinner
nut that matches your shaft thread size. If you are using the
recommended brushless motor, you will also need to install
the prop nut included with the motor before the spinner nut.
❏
6. Install the spinner cone onto the backplate with the 4 x
45mm SHCS.
❏
7. You have now completed the assembly!