Golden Lighting 8118-SF PW - Manual

1ea ∅5-3/4"*H1-1/2" 4ea 8#32-IP*1" 1ea 1/8-IP*H60mm
1ea 6ft ∅3.8 3ea P3 Orange 1ea W4-1/8"*E1"*H5mm
2ea ∅5.8*H61mm 1ea ∅1-1/8"*H42mm 1ea 1/4-IP*H60mm
Connector
1ea ∅1-1/2"*H5mm 1ea 1/8-IP*H35mm 1ea 1/8-IP"*H15mm
1ea ∅1-1/4"*H49mm 1ea 1/8-IP*H85mm
Part Needed Quantity
Part Needed Quantity
Reason why (missing, scratched, broken glass, bent, bad finish)
Comments
PARTS & ASSEMBLY SHEET
Fixture Name: Alston Place 8118-SF BUS
This fixture assembled PO:__________ Date: ________
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
Finial Nipple Deco Nut
Canopy Mounting Screws Top Loop
Chain Wire connectors Mounting Strap
Chain Connector
Canopy loop
with Collar
Nipple
Cap Nipple
2ea 5/32-IP*H10mm
Mounting Strap Hex Nut Mounting Screws
1ea ∅4"*H2mm 2ea 5/32-IP*H3mm 2ea 5/32-IP*2-1/2"
F IXTURE A SSEMBLY I NSTRUCTIONS
Read and review installation instruction sheet
before assembling the fixture.
8118-SF BUS
ASSEMBLING THE FIXTURE as Semi-flush (Fig. 1)
1. Thread Nipple (T) into Connector (R). Slide Glass
Shade (S), then Cap (U) onto Nipple (T). Thread
connector (V) until tight.
2. Thread Nipple (W) into connector (V). Put Cap (X)
onto Nipple (W) and use Finial (Y) to tighten.
3. Install the light bulbs in accordance with the fixture's
specification.
DO NOT EXCEED MAXIMUM WATTAGE RATING!
Fig. 1
NOTE: INSTALL THE GLASS ASSEMBLY
AFTER THE FIXTURE IS HUNG.
For Customer Service, contact the place of purchase to arrange for replacement parts.